Appendix B — Default Settings
PC42t Desktop Printer User Guide 49
Ethernet Settings
This section describes the Ethernet IPv4 settings. To view these
settings:
• From the printer web page, click the Configure tab >
Communications > Ethernet.
Media Settings
This section describes media settings for the printer. To view these
settings:
• From the printer web page, click the Configure tab > Printing >
Media.
New Line
Character
Defines the characters that the printer echoes to the
host to indicate that it has moved to a new line.
CR/LF
Serial Port Settings (continued)
Setting Description Default
Ethernet Settings
Setting Description Default
IP Assignment
Method
Specifies how the printer obtains an IP address. DHCP
IP Address Specifies the unique network-level address that is
assigned to each device in a TCP/IP network (IPv4).
0.0.0.0
Subnet Mask Specifies a number that defines the range of IP
addresses that can be used in a TCP/IP network.
0.0.0.0
Default Router Specifies the IP address of a router that is used when a
device sends a packet to another subnet or to an
unknown destination.
0.0.0.0
DHCP Response Specifies if the printer receives DHCP responses by
broadcast or unicast.
Br
Note: If the printer is not connected to a network, you need to use
PrintSet 5 through a USB connection to configure the media settings.
To Next Page
Loading...
