EasyManuals Logo

Honeywell PD45 User Manual

Honeywell PD45
94 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
PD45 User Guide 7
Communications Wizard
Calibration Wizard
Printer Command Languages and Simulator Support
Options
A printer command language is a set of instructions that controls printer functions:
Configure the printer
Return the status of the printer
Control peripheral devices
Format a label or receipt for printing
The printer supports these command languages and language simulator support
options:
Autosense
Direct Protocol
Fingerprint
IPL
ZSim
DPL
Smart Printing
Wizard Description
Line Analyzer Logs all incoming data on all communications channels and saves the
data to a log file. For advanced users.
Wizard Description
Media Calibrates all media sensors and shows current print settings.
Sensor Calibrates the sensor used with the label dispenser. Available when the
sensor is installed.
Date and Time Calibrates the date and time.
Screen Calibrates the touch screen.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell PD45 and is the answer not in the manual?

Honeywell PD45 Specifications

General IconGeneral
Print TechnologyDirect Thermal / Thermal Transfer
Ribbon Core1 inch (25.4 mm)
Print Resolution203 dpi
Max Print Width4.25 inches (108 mm)
Max Print Speed8 ips (203 mm/s)
ConnectivityUSB 2.0, RS-232, Ethernet
Media HandlingLabel gap, label black mark
Media Thickness0.0025 inch to 0.01 inch (0.0635 mm to 0.254 mm)
Ribbon Width1 inch to 4.33 inches (25.4 mm to 110 mm)
Ribbon Length984 feet (300 meters)
Operating Temperature5°C to 40°C (41°F to 104°F)
Power Requirements100-240 VAC, 50/60 Hz
Media Width25.4 mm (1 in) to 118 mm (4.65 in)

Related product manuals