EasyManuals Logo

Honeywell PD45 User Manual

Honeywell PD45
94 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #41 background imageLoading...
Page #41 background image
PD45 User Guide 31
USB Host Port
Use the USB host interface port on the printer to connect these peripheral devices:
You can also connect a peripheral device through the USB-to-Serial or USB-to-
Parallel adapter cable accessories. Contact your local sales representative for
information.
Connect a USB Device
A USB storage device can be inserted into the USB host port on the front of
printer or into the USB host port on the back of the printer.
1. If you are connecting a USB storage device, make sure the device has a single
partition and is formatted as FAT16 or FAT32.
2. Connect the device to one of the USB host ports.
3. If you connected a USB storage device to an LCD printer, select Tools > USB
Menu for more options.
Device Description
Keyboard Use a standard USB keyboard to send Fingerprint printer language commands
directly to the printer or to enter information if you are running a Smart Printing
application.
Barcode scanner Use USB barcode scanners for data input with a Smart Printing application. The
printer also supports other USB scanners that use a generic keyboard driver.
USB storage
device
Use a USB storage device to load applications, configuration files, fonts, and
images into the printer memory, or to perform firmware upgrades. You can also
save configuration files to a USB storage device for upload to a printer. The USB
storage device must have a single partition and be formatted as FAT16 or
FAT32.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell PD45 and is the answer not in the manual?

Honeywell PD45 Specifications

General IconGeneral
Print TechnologyDirect Thermal / Thermal Transfer
Ribbon Core1 inch (25.4 mm)
Print Resolution203 dpi
Max Print Width4.25 inches (108 mm)
Max Print Speed8 ips (203 mm/s)
ConnectivityUSB 2.0, RS-232, Ethernet
Media HandlingLabel gap, label black mark
Media Thickness0.0025 inch to 0.01 inch (0.0635 mm to 0.254 mm)
Ribbon Width1 inch to 4.33 inches (25.4 mm to 110 mm)
Ribbon Length984 feet (300 meters)
Operating Temperature5°C to 40°C (41°F to 104°F)
Power Requirements100-240 VAC, 50/60 Hz
Media Width25.4 mm (1 in) to 118 mm (4.65 in)

Related product manuals