Honeywell PD45 User Manual

CHAPTER
6
PD45 User Guide 53
MAINTENANCE
Clean the Printer
To properly maintain the printer, you should clean it regularly. You can clean these
parts of the printer:
•Printhead
•Platen roller
• Media guides
•Media path
• Exterior of the printer
Follow these guidelines for cleaning the printer:
• Always remove the power cord before cleaning.
• Never spray the printer with water. Protect it from water when cleaning the
premises.
Warning: Disconnect the power cord from the socket-outlet before
installing user-service parts in the printer.
Caution: To avoid possible personal injury or damage to the printer, never insert
any pointed or sharp objects into the printer.
Caution: Use only the cleaning agents specified in this section. Honeywell is
not responsible for damage caused by any other cleaning materials
used on this printer.
Caution: Isopropyl alcohol is a highly flammable, moderately toxic, and mildly
irritating substance.
Caution: Do not spray the printer with water. If you are using a hose to
clean the premises in an industrial environment, remove the
printer or protect it carefully from spray and moisture.

Honeywell PD45 Specifications

General

Print Technology	Direct Thermal / Thermal Transfer
Ribbon Core	1 inch (25.4 mm)
Print Resolution	203 dpi
Max Print Width	4.25 inches (108 mm)
Max Print Speed	8 ips (203 mm/s)
Connectivity	USB 2.0, RS-232, Ethernet
Media Handling	Label gap, label black mark
Media Thickness	0.0025 inch to 0.01 inch (0.0635 mm to 0.254 mm)
Ribbon Width	1 inch to 4.33 inches (25.4 mm to 110 mm)
Ribbon Length	984 feet (300 meters)
Operating Temperature	5°C to 40°C (41°F to 104°F)
Power Requirements	100-240 VAC, 50/60 Hz
Media Width	25.4 mm (1 in) to 118 mm (4.65 in)