Honeywell PD45 User Manual

APPENDIX
B
79
PRINT LABELS WITH INPRINT
The INPrint Page
The INPrint page features sample web forms you can use to print single labels if
you are using the Fingerprint or Direct Protocol Language on your printer. Select a
web form from the lists and enter information in the fields for that label. You can
then preview and print the label.
The printer firmware includes several predefined label formats. You can also copy
your own label formats to the printer and print them from the INPrint page.
Print INPrint Labels
If the printer is connected to an Ethernet or Wi-Fi network, you can print labels by
entering information in a web form. Access the web forms through the printer web
page.
1. Open a browser window on your PC.
2. In the location or address bar, type the printer IP address and press Enter. The
printer web page appears.
3. Click the INPrint tab.
4. Select the web form you want to print:
• If you created the web form yourself, click Customer Downloaded and then
select the web form in the list.
• To use one of the Honeywell resident web forms, click Resident and then
select the web form in the list.
5. Type information in the web form as needed.
To preview the label on screen, click Preview. To print the label, click Print.

Honeywell PD45 Specifications

General

Print Technology	Direct Thermal / Thermal Transfer
Ribbon Core	1 inch (25.4 mm)
Print Resolution	203 dpi
Max Print Width	4.25 inches (108 mm)
Max Print Speed	8 ips (203 mm/s)
Connectivity	USB 2.0, RS-232, Ethernet
Media Handling	Label gap, label black mark
Media Thickness	0.0025 inch to 0.01 inch (0.0635 mm to 0.254 mm)
Ribbon Width	1 inch to 4.33 inches (25.4 mm to 110 mm)
Ribbon Length	984 feet (300 meters)
Operating Temperature	5°C to 40°C (41°F to 104°F)
Power Requirements	100-240 VAC, 50/60 Hz
Media Width	25.4 mm (1 in) to 118 mm (4.65 in)