112 | Performance Series DVR User Guide
www.honeywellvideo.com
The local settings include:
• Local Log Search: Search and view logs of HRG DVR.
• Local Configuration: Configure and restore parameters to factory defaults. Introduce
settings to or export settings from HRG DVR.
• Local Advanced Operation: HDD management (including the initialization and
changing the properties of a disk). Ability to update system firmware as well as to stop
the relay output
• Local Shutdown/Reboot: Shut down or reboot the HRG DVR.
8. Select the Network Permission tab to configure network permission settings (see
Figure 12-7).
Figure 12-7 Network Permission Settings Menu
The network settings include:
• Remote Log Search: Remotely view logs that are saved on the HRG DVR.
• Remote Configuration: Remotely configure parameters, restore parameters to
factory defaults and import settings to as well as export settings from the HRG DVR.
• Remote Serial Port Control: Configure settings for RS232 and RS485 ports.
• Remote Video Output Control: Configure settings for video output.
• Two-way Audio: Permission to use two-way radio between the remote client and the
DVR.
• Remote Alarm Control: Remote alert or control the relay output of the HRG DVR.
Alarm and exception settings must be configured properly to upload to host.
• Remote Advanced Operation: Remotely manage hard disk drives (initializing and
setting properties for HDDs). Permission to remotely update system firmware and
stop relay output.
• Remote Shutdown/Reboot: Remotely shut down or reboot the HRG DVR.
9. Select the Camera Permission tab to configure channel permission (see Figure 12-8).
To Next Page
Loading...
Need help?
General