Honeywell Performance HRG4 User Manual

42 | Performance Series DVR User Guide
www.honeywellvideo.com
Setting the Date and Time
You must set up the system date and time to accurately timestamp recordings and events.
To set up the date and time:
1. Open the General Settings Menu by doing one of the following:
•Press MENU on the remote control or the front panel of the HRG DVR.
• Right-click with the mouse, and then click Menu.
2. Click Settings, and then click General to enter the General Settings menu.
Figure 2-12 Setting the Date and Time
3. Enter the correct date and time in the System Time field.
4. Click Apply to save the settings.

Honeywell Performance HRG4 Specifications

General

Brand	Honeywell
Model	Performance HRG4
Category	DVR
Language	English