800-12005V1 - A - 08/2012
Alarm Settings | 79
2. Select the Advanced tab to enter the Advanced Camera Settings menu.
3. Select the camera to be configured with video tampering detection.
4. Select the Tamper Detection check box to enable this feature (see Figure 7-19).
Figure 7-19 Advanced Camera Settings - Tamper Detection
5. Next to Tamper Detection, click Handle to enter the Exception Handle menu.
6. Select the Schedule tab to set when you want video tampering detection to be enabled
(see Figure 7-20). The schedule can be set for all week or any day of the week, with up to
eight time periods per day.
Figure 7-20 Schedule Settings
Note After you have configured the schedule, the HRG DVR must be restarted for the
new settings to take effect.
7. Select the Handle tab to configure exceptions handling (see Figure 7-21). Exception
trigger options are described in Understanding Exception Trigger Options on page 81.
To Next Page
Loading...
