Honeywell ScanPal EDA10A User Manual

34 EDA10A Enterprise Tablet User Guide
Symbology Settings
Use the Symbology Settings to enable or disable barcode symbologies for the
selected scan setting profile.
• Tap the check box next to a symbology name to enable (check mark) or disable
(no check mark) decoding for that symbology.
• Tap the symbology name to view and modify additional configuration
parameters for the symbology selected.
To view a list of default settings for supported symbologies, see page 84.
Decode Settings
Adjust the Decode Settings when scanning barcodes that are densely packed or
poor quality.
Launch Browser Enable or disable URL barcode handling.
If a barcode starts with http:// or https://, the browser
opens using the barcode data as a URL.
Corresponds to BarcodeReader property:
PROPERTY_DATA_PROCESSOR_LAUNCH-BROWSER
Enable
Scan to Intent Enable or disable special handling of scan-to-intent
barcodes.
Applies to barcodes in one of the following formats:
‘//’ ACTION
‘//’ ACTION '$' extra-data
Where: ACTION and extra-data are any string of
characters.
Launches an application listening for the intent.
Intent action:
“com.honeywell.scantointent.intent.action.” + ACTION
Intent extra:
“com.honeywell.scantointent.intent.extra.DATA” contains
the remainder of the barcode data after the first ‘$’
character.
Corresponds to BarcodeReader property:
PROPERTY_DATA_PROCESSOR_SCAN_TO_INTENT
Enabled
Launch EZ Config Enable or disable special handling of EZConfig barcodes.
Applies to EZConfig barcodes that are encoded with the
Aztec symbology and contain specific header data.
Corresponds to BarcodeReader property:
PROPERTY_DATA_PROCESSOR_LAUNCH_EZ_CONFIG
Enabled
Data Intent Enables the reception and processing of barcode data
without using an SDK or library.
Disabled
Setting Description Default
DRAFT - 3/24/23

Honeywell ScanPal EDA10A Specifications

General

Brand	Honeywell
Model	ScanPal EDA10A
Category	Tablet
Language	English