User’s Guide SMX-AUS
14 NS-MN-0032 / 11.2020
5.5 Status Display Indications
The 800 x 480 multi-colour capacitive touchscreen is the primary status indicator. The panel can display and process various events, which are categorized broadly in
the following categories:
1. "Fire Events"
2. "Supervisory Events"
3. "Fault Events"
4. "Disabled Events"
5. "Test Events"
The screen and LED indicators show the status of the panel for each of these categories. Events being displayed follow a priority order as listed above; indications of
fire always have priority over ALL other events indicated at the panel.
5.5.1 States of the Screen
The screen can be either in the Active state or in the Sleep state.
The screen displays various details, such as the state (SAFE), system date and time, panel model and the brand logo (at the bottom right of the screen). The screen
also displays the site name and panel name, if configured by the user, at the centre of the screen. If configured by the user, the service details (service company name
and phone number), are displayed at the bottom left of the screen.
The date is shown in the DD MMM YYYY format. The time is displayed in the 24 hours format.
The screen is in high-power state and ready to use. In this state, the
main menu can be accessed by tapping the icon from the top left
of the screen. The screen also displays the current user level at the top
If the touchscreen is not touched for 30 seconds, the screen goes to the sleep state. Tap
anywhere on the screen to get the screen into the Active state.
Fig. 2: Screen in the Active State
Fig. 3: Screen in the Sleep State
To Next Page
Loading...
