Honeywell SMX-AUS - Maintenance; RUN TEST

User’s Guide SMX-AUS
NS-MN-0032 / 11.2020 31
8 Maintenance
To perform the Maintenance steps, tap
and select the Maintenance tab. The
Maintenance
screen has the following tabs:
1.
RUN TEST.
2.
ALARM COUNT and VOLTAGES.
3.
PANEL INFO.
8.1
RUN TEST
The RUN TEST tab has the following options:
•
ZONE TEST
• Other tests
Fig. 30: Maintenance
8.1.1 ZONE TEST
In the Zone Test option, you can test if all the zones are working. You can select the range of
zones for testing.
Perform the following steps to run the Zone Test:
1.
In RUN TEST screen, tap ZONE TEST. The Zone Test screen opens.
The Zone Test screen shows that no zones are in the test.
2.
To test a range of zones, tap ZONE RANGE in the Zone Test screen.
Fig. 31: Zone Test