Honeywell SMX-AUS - ENABLE OR DISABLE - ZONES

User’s Guide SMX-AUS
NS-MN-0032 / 11.2020 27
7.2.2 ENABLE OR DISABLE - ZONES
Perform the following steps to enable or disable zones:
1.
In ENABLE/DISABLE tab, tap ZONES to enable or disable a zone.
The
Zones
screen opens with a list of zones in the panel and the input devices associated to this
zone.
2.
Tap DETAILS to view list of input devices in the zone with state.
3.
Tap ENABLE to enable the zone or tap DISABLE to disable the zone.
Fig. 24: Loop Devices
Fig. 25: List of input devices