Honeywell SMX-AUS - Quick Settings; Set Time and Date

User’s Guide SMX-AUS
40 NS-MN-0032 / 11.2020
10 Quick Settings
From any screen, tap
and select the Quick Settings tab to set the date and time by using
the number keys
and Programmable zones delay -ON/OFF.
The time is set in 24 hours format.
10.1
Set Time and Date
Perform the following steps to set the date and time:
1.
In the Quick Settings screen, tap SET TIME & DATE.
Fig. 44: Quick Settings
2.
In the next screen, set the time and date, and then tap SET.
Fig. 45: Set Time and Date