Honeywell SMX-AUS - Fire Events; View Fire-Detected Zones

User’s Guide SMX-AUS
16 NS-MN-0032 / 11.2020
5.5.3 Fire Events
When there is a fire event, the panel screen automatically shows details about the fire condition. Information such as the total number of zones that are in fire, the first
zone that detected the fire and the number of devices that are in the fire zone, are displayed on the screen.
To view the details of the devices that have detected fire, tap DEVICES IN FIRE.
The image below shows the first zone and the additional fire-detected zones. For example, a total of 36 devices in 7 zones have detected fire.
5.5.3.1 View Fire-Detected Zones
The ZONES IN FIRE tab contains the following details:
Total number of zones in fire
First zone in fire
First device in fire
Number of devices in fire for the first zone
Additional zones in fire
Zone number | Zone description
Number of devices in fire for the zone
Time
-stamp
Fig. 6: Zones in Fire