Honeywell SMX-AUS - ENABLE OR DISABLE - INPUTS

User’s Guide SMX-AUS
26 NS-MN-0032 / 11.2020
7.2.1 ENABLE OR DISABLE - INPUTS
Perform the following steps to enable or disable a loop input device individually:
1.
In ENABLE/DISABLE tab, tap INPUTS option.
2.
The Inputs screen appears. You
can see the loops and the input devices connected in each
loop.
3.
In the Inputs screen, tap to view the list of input devices in the loop.
Fig. 22: Loop Input Devices
4.
Tap ENABLE to enable the device or tap DISABLE to disable the device.
Fig. 23: ENABLE / DISABLE Devices