Honeywell SMX-AUS - Disabled Events; Enable the Disabled Events

User’s Guide SMX-AUS
NS-MN-0032 / 11.2020 19
5.5.6 Disabled Events
Fig.
10: Disabled Events
To access the disabled tab, tap
DIS. The ALL tab contains the following details:
•
Disabled event description
•
Device type
•
Device description
•
Zone number
•
Zone description
•
Loop number
•
Device address
•
Number of input devices disabled
•
Time-stamp
For Logic Zone disablement there are the following details:
•
Logic zone number
•
Logic zone description
•
Operator
• Number of inputs and number of outputs associated with the logic zone
You can also enable the disabled events.
1.
In the disabled event, tap the ENABLE option.
2.
A confirmation screen appears. Tap YES to enable the disabled device
(or zone or logic zone or output group or programmable Relay.).
Fig. 11: Enable the Disabled Events