User’s Guide SMX-AUS
NS-MN-0032 / 11.2020 29
4. The Details Screen appears as shown. You can see applicable operators, inputs and
outputs of a logic zone.
5. Tap next to Loop Outputs to see details of each loop output device.
Fig. 27: Logic Zone Details
6. You can see the quantity of loop outputs associated with the logic zone.
7. Tap LOOP 1 or LOOP 2
to see the list of output devices in the respective loop, that are
associated with the logic zone. You can see the details -
device type, device description
and device address for each output.
Fig. 28: Logic Zone Loop Output Details
To Next Page
Loading...
