Honeywell UDA2182 - Add Alarm Recipient Configuration Page; Figure 12-6 Add Alarm Recipient; Table 12-3 Adding an Alarm Recipient

Web Pages
44 UDA2182 Communications User Guide January 09
12.4.3 Add Alarm Recipient Configuration Page
Overview
Click on the “Add Alarm Recipient” tab on the Network Configuration page.
You can assign alarm alerts to be sent to a particular email address.
Only the user with Admin Access will be able to change configurations on this page. User logged in as
Guest will only be able to view the configurations.
Figure 12-6 Add Alarm Recipient
Adding an Alarm Recipient
Up to 8 Alarm Recipients can be configured. Whenever the Alarm’s state changes, the recipients will
reveive alarm alerts for the alarms for which they have subscribed.
Table 12-3 Adding an Alarm Recipient
Step Action
1
Enter the email address of the alarm recipient in the text box. The address should not exceed 255
characters.
2
Click on the boxes to select the Alarms for which the recipient wants to subscribe. A recipient can
subscribe to any number of alarms.
3
Press “Configure” to add the alarm recipient to the table of configured alarm recipients.
Note: If already 8 alarm recipients are entered, a new entry will replace the first entry in the table.
4
To Delete any of the Alarm recipients, select the appropriate boxes, then press the “Delete” button.
4
Press the
tab on the left hand menu.