Web Pages
46 UDA2182 Communications User Guide January 09
12.5 Parameters Page
Accessing the Parameters page
Click on the Parameters tab in the main menu on the left hand side to monitor the parameters shown.
No configuration can be done from this page.
Parameter Tables
Figure 12-8 Monitor Parameters Page
Paremeter Tables Details
Process Values Displays the Tag Name, Value, Temperature, and the Status of the Inputs
presently connected to the UDA.
Device Output Displays the value and the Status of the Outputs present on the UDA.
Relay Outputs Displays the Status of the four Relay Outputs.
Alarm Status Displays the Status of the four Alarms and their tagnames.
The parameters page gets refreshed at the rate of 10 seconds. A slight flicker can be observed while the page
gets refreshed.
Tagname, Device date and Time are displayed on the right bottom corner of the page.
Note: If you don’t see all of the parameters on a single screen, you can increase your screen resolution
for your windows desktop display properties.
To Next Page
Loading...
