DescriptionDefault ValueRegistry Key
Length value L2. Range is 0x0 to 0xFF (0 to 255).0x0TelepenBarCodeLengthL2
Length value L3. Range is 0x0 to 0xFF (0 to 255).0x0TelepenBarCodeLengthL3
Length verification mode, where 0 = "L1 is min length", 1 =
"L1, L2, L3 are fixed lengths", and 2 = "L1 is min, L2 is max
length".
0x0TelepenBarCodeLengthMode
Sets output format, where 0 = ASCII and 1 = numeric.0x0TelepenFormat
User-defined symbology identifier. Range is 0-4 characters."C6"TelepenUDSI
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\Code 11] - Code 11 Symbology Configuration
Enables the Code 11 symbology.0x0Code11Activation
A single character inserted before the barcode data to
indicate the symbology.
0x2aCode11CodeMark
Number of check digits to verify. Range is 1 to 2.0x1Code11CheckDigitVerification
Length value L1. Range is 0x0 to 0xFF (0 to 255).0x4Code11BarCodeLengthL1
Length value L2. Range is 0x0 to 0xFF (0 to 255).0x0Code11BarCodeLengthL2
Length value L3. Range is 0x0 to 0xFF (0 to 255).0x0Code11BarCodeLengthL3
Length verification mode, where 0 = "L1 is min length", 1 =
"L1, L2, L3 are fixed lengths", and 2 = "L1 is min, L2 is max
length".
0x0Code11BarCodeLengthMode
Enable transmission of the check digit.0x1Code11CheckDigitTransmission
User-defined symbology identifier. Range is 0-4 characters."C1"Code11UDSI
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\EAN / UPC] - EAN/UPC Symbology Configuration
Enables the UPC-A symbology.0x1UPC-AActivation
Enables the UPC-E symbology.0x1UPC-EActivation
Enables the EAN-8 symbology.0x1EAN-8Activation
Enables the EAN-13 symbology.0x1EAN-13Activation
Converts EAN-13 barcodes starting with "978" or "979"
(except for "9790") to ISBN (International Standard Book
Number) format.
0x0ISBNConversionforEAN-13
Enables decoding of 2-digit EAN/UPC supplements.0x0EANUPCAdd-On2
Enables decoding of 5-digit EAN/UPC supplements.0x0EANUPCAdd-On5
Confidential: For informational use by Honeywell resellers and customers only
72 | Vocollect Talkman A700 Product Guide
To Next Page
Loading...
