Honeywell XENON 1900 User Manual

7 - 60
Planet Code Check Digit
This selection allows you to specify whether the check digit should be
transmitted at the end of Planet Code data.
Default = Don’t Transmit.
Postnet Check Digit
This selection allows you to specify whether the check digit should be
transmitted at the end of Postnet data.
Default = Don’t Transmit.
Australian Post Interpretation
This option controls what interpretation is applied to customer fields in Aus-
tralian 4-State symbols.
Bar Output lists the bar patterns in “0123” format.
Numeric N Table causes that field to be interpreted as numeric data using
the N Table.
Alphanumeric C Table causes the field to be interpreted as alphanumeric
data using the C Table. Refer to the Australian Post Specification Tables.
Combination C and N Tables causes the field to be interpreted using
either the C or N Tables.
* Don’t Transmit Check Digit
Transmit Check Digit
* Don’t Transmit Check Digit
Transmit Check Digit

Honeywell XENON 1900 Specifications

General

Type	Handheld bar code reader
Sensor type	Laser
Scanner type	1D/2D
Pitch reading angle	-45 - 45 °
Linear (1D) barcodes supported	-
Standard interfaces	USB, Keyboard wedge, RS-232, RS-485
Connectivity technology	Wired
Input voltage	4 - 5.5 V
Power consumption	450 mA
Power source type	DC
Power consumption (standby)	0.45 W
Power consumption (typical)	2.3 W
Shockproof	Yes
Product color	Black
International Protection (IP) code	IP41
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Sustainability certificates	RoHS

Weight and Dimensions

Depth	104 mm
Width	71 mm
Height	160 mm
Weight	147 g