Honeywell XENON 1900 User Manual

11 - 5
Menu Commands
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page
Product Default Settings
Setting Custom
Defaults
Set Custom Defaults MNUCDP 1-15
Save Custom
Defaults
MNUCDS 1-15
Resetting the
Custom Defaults
Activate Custom
Defaults
DEFALT 1-16
Resetting the Factory
Defaults
Remove Custom
Defaults
DEFOVR 1-16
Activate Defaults DEFALT 1-16
Resetting the Factory
Defaults - cordless
scanners
Factory Default
Settings:
All Application
Groups
PAPDFT& 3-29
Resetting the
Custom Defaults -
cordless scanners
Custom Default
Settings:
All Application
Groups
PAPDFT 3-30
Programming the Interface
Plug and Play Codes Keyboard Wedge:
IBM PC AT and
Compatibles with
CR suffix
PAP_AT 2-1
Laptop Direct
Connect with CR
suffix
PAPLT D 2-1
RS232 Serial Port PAP232 2-2

Honeywell XENON 1900 Specifications

General

Type	Handheld bar code reader
Sensor type	Laser
Scanner type	1D/2D
Pitch reading angle	-45 - 45 °
Linear (1D) barcodes supported	-
Standard interfaces	USB, Keyboard wedge, RS-232, RS-485
Connectivity technology	Wired
Input voltage	4 - 5.5 V
Power consumption	450 mA
Power source type	DC
Power consumption (standby)	0.45 W
Power consumption (typical)	2.3 W
Shockproof	Yes
Product color	Black
International Protection (IP) code	IP41
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Sustainability certificates	RoHS

Weight and Dimensions

Depth	104 mm
Width	71 mm
Height	160 mm
Weight	147 g