24
4.4.4 Access Control
The Wireless Access Control is based on the MAC address of the wireless
adapter to determine whether it communicates with the Router or not.
Select "Off" to disable this function.
Select "Allow" or "Block" to enable this function.
4.4.5 Connection Status
Here you can see a list of the wireless devices connected to the router.
MAC Address: Shows the connecting PC's MAC address.
Bandwidth: The width of the channel frequency.
Note: The bandwidth refers to the channel bandwidth instead of the
wireless connection rate. This page informs you if there are unauthorized
connections to your wireless network by viewing the wireless client list.
To Next Page
Loading...
