38
Shaft monitoring
The system is able to display and monitor the
speeds of two shafts.
For this purpose enter the desired minimum
speeds for both shafts with the + and - keys.
Enter the number of pulses per revolution for
both shafts.
If the minimum speed is fallen short of, an
audible and visible alarm will be emitted.
Fan monitoring
For fan monitoring the maximum speed can be
entered and monitored alongside the minimum
speed.
For the fan the number of pulses per revolution
(2) must also be entered.
When the limit values are exceeded or fallen
short of, an audible and visible alarm will be
emitted.
Control factor
The control factor has no function yet.
To Next Page
Loading...