41
WARNING
Be careful: there may be burning residues.
- Reposition the flame retardant plate and the ash pan;
- Reposition the ash pan making sure that the bigger hole on its
right side its with the ignition resistance pipe (Figure 18).
- Close the fire box door.
- Make sure the device is connected to the power supply system.
- Check that the back switch is on "I".
26.ROUTINE MAINTENANCE
IMPORTANT : clean the brazier every time you switch the stove on (Position F) once every 2-3 days have the ash pan (Position I) and the
brazier support cleaned (Position L). We suggest you disassemble the flame trap (Position M) and the inspection plug once a month
(Position M1) cleaning up the area by using an appropriate vacuum cleaner.
To Next Page
Loading...
