Do you have a question about the Hotone AMPERO MINI and is the answer not in the manual?
digital audio signal processing | 24-bit depth, 44.1kHz sample rate |
---|---|
dynamic range (DNR) | Max. 112dB (DA) |
impulse response/IR processing | Supports 24-bit/44.1kHz Mono WAV files, 1024 points |
effects | 199 |
---|---|
effects modules | Total of 9 simultaneous |
patches | 198 (99 user patches, 99 factory patches) |
looper time | Mono 100 seconds, Stereo 50 seconds |
---|---|
internal drum machine | 100 Rhythm Patterns |
inputs | One 1/4" TS Instrument jack, One 1/8" Stereo Aux In jack, One 1/4" TRS Expression Pedal input jack |
---|---|
outputs | One 1/4" TRS Unbalanced Stereo output jack, One 1/8" Stereo headphones output jack |
usb port | USB 2.0 Type-C port, supports USB Audio 2.0 |
instrument input resistance | 4.7MΩ |
---|---|
aux in resistance | 10kΩ |
output resistance | 1kΩ |
screen size | 4" |
---|---|
display resolution | 800 x 480 |
display type | Color Dynamic Display Touch Screen |
power requirements | 9V DC Center Negative |
---|---|
current consumption | 500mA Max |
dimensions | 134mm (W) x 120mm (D) x 49mm (H) |
---|---|
weight | 529g |
Details on all physical input and output jacks for instruments and accessories.
Explanation of physical controls like footswitches, knobs, and display screen.
Steps for connecting your device, powering on, and using the tuner.
Instructions on how to select and navigate through preset patches.
Detailed guide on using the built-in chromatic tuner for accurate tuning.
Guide to editing patches, saving changes, and managing effect modules.
Interface for editing individual effect modules and their parameters.
Configuration of CTRL functions, quick access parameters, and expression pedal.
Configuration and calibration options for external expression pedals.
Instructions on how to save edited patches and control settings.
Details on configuring I/O, USB Audio, Display, and EXP/FS settings.
Common setups for connecting to instruments and amplifiers.
Connecting to mixers, audio interfaces, and headphones.
Using the device as a computer audio interface and integrating into pedalboards.
Connecting audio sources via AUX IN and managing the device with software.
Details on Dynamic effects models available for FX1, FX2, and FX3.
List and descriptions of Modulation effects models.
List and descriptions of Overdrive and Distortion effects models.
Descriptions for Clean and Drive amplifier simulation models.
Descriptions for Bass, Acoustic, Noise Reduction, and Cabinet/IR effects.
Details on Equalizer and Impulse Response (IR) effects models.
List and descriptions of Delay effects models.
List and descriptions of Reverb effects models.
Catalog of available drum machine rhythm patterns and types.