EasyManua.ls Logo

Hotone AMPERO MINI - Troubleshooting; Technical Specifications

Hotone AMPERO MINI
37 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Troubleshooting
Device won’t turn on
• Make sure the adapter is working properly and the power jack is
firmly connected.
• Check if you’re using the correct power adapter.
No sound or slight sound
• Make sure your cables are connected properly.
• Make sure the volume knob is adjusted properly.
When the expression pedal is used for volume control, check it’s
position and volume settings.
• Check the effects module volume settings.
• Check the patch volume settings.
• Make sure your input device is not muted.
Noise
• Make sure your cables are connected properly.
• Check your instrument output jack.
• Check if you’re using the correct power adapter.
If the noise is coming from your instrument, try using the noise
reduction module to adjust it.
Sound problems
• Make sure your cables are connected properly.
• Check your instrument output jack.
If you’re using an external expression pedal to control distortion or
other similar parameters, check to see if the expression pedal is set
up properly.
Check your effects parameter setup. If effects are set to extremes,
Ampero Mini may only emit noise.
If you’re using stereo output connection, please make sure you’re
using a proper Y cable.
Problems with expression pedal
• Check your EXP/FS settings in Global menu.
• Try calibrating the pedal.
When using an external expression pedal, make sure you’re using
a 1/4" male-to-male TRS cable.
Technical Specifications
Digital Audio Signal Processing: 24-bit depth, 44.1kHz sample rate
DNR: Max. 112dB (DA)
Effects: 199
Effects Modules: Total of 9 simultaneous
Patches: 198 (99 user patches, 99 factory patches)
Looper Time: Mono 100 seconds, Stereo 50 seconds
Internal Drum Machine: 100 Rhythm Patterns
Inputs:
One 1/4" Tip Sleeve (TS) Instrument jack
One 1/8" Stereo Auxiliary In (Aux In) jack
One 1/4" Tip Ring Sleeve (TRS) Expression Pedal input jack
Outputs:
One 1/4" Tip Ring Sleeve (TRS) Unbalanced Stereo output jack
One 1/8" Stereo headphones output jack
Input resistance:
Instrument Input: 4.7MΩ
Aux In: 10kΩ
Output resistance:
Output: 1kΩ
Headphones: 22Ω
Screen: 4" 800 x 480 Color Dynamic Display Touch Screen
USB Port: USB 2.0 Type-C port, supports USB Audio 2.0
Impulse Response/IR processing: Supports 24-bit/44.1kHz Mono
WAV files, 1024 points
Power Requirements: 9V DC Center Negative
Current Consumption: 500mA Max
Dimensions: 134mm (W) x 120mm (D) x 49mm (H)
Weight: 529g
DES I G N IN S P IRAT I ON
35

Other manuals for Hotone AMPERO MINI

Related product manuals