HP 5120 SI Series

107
# Enable MAC authentication for port GigabitEthernet 1/0/1.
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] mac-authentication
3. Configure the RADIUS servers
# Add a user account with 00-e0-fc-12-34-56 as both the username and password on the RADIUS server,
and specify ACL 3000 as the server-assigned ACL for the user account.
Omitted.
4. Verify the configuration
After the host passes authentication, perform the display connection command on the device to view the
online user information.
[Sysname-GigabitEthernet1/0/1] display connection
Slot: 1
Index=696 , Username=00-e0-fc-12-34-56@2000
IP=N/A
IPv6=N/A
MAC=00e0-fc12-3456
Total 1 connection(s) matched on slot 1.
Total 1 connection(s) matched.
Ping the FTP server from the host to verify that ACL 3000 has been assigned to port GigabitEthernet
1/0/1 to deny access to FTP server.
C:\>ping 10.0.0.1
Pinging 10.0.0.1 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Ping statistics for 10.0.0.1:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),