HP 5920 - Page 173

T
yp
e Number of ke
y
p
airs Modulus len
g
th HP recommendation
ECDSA
The command only creates one host key
pair.
192 bits. N/A
NOTE:
Only SSH 1.5 uses the RSA server key pair.
Examples
# Create local RSA key pairs with default names.
<Sysname> system-view
[Sysname] public-key local create rsa
The range of public key modulus is (512 ~ 2048).
If the key modulus is greater than 512, it will take a few minutes.
Press CTRL+C to abort.
Input the modulus length [default = 1024]:
Generating Keys...
...++++++
.++++++
..++++++++
....++++++++
Create the key pair successfully.
# Create a local DSA key pair with the default name.
<Sysname> system-view
[Sysname] public-key local create dsa
The range of public key modulus is (512 ~ 2048).
If the key modulus is greater than 512, it will take a few minutes.
Press CTRL+C to abort.
Input the modulus length [default = 1024]:
Generating Keys...
.++++++++++++++++++++++++++++++++++++++++++++++++++*
........+......+.....+......................................+..+................
.......+..........+..............+.............+...+.....+...............+..+...
...+.................+..........+...+....+.......+.....+............+.........+.
........................+........+..........+..............+.....+...+..........
..............+.........+..........+...........+........+....+..................
.....+++++++++++++++++++++++++++++++++++++++++++++++++++*
Create the key pair successfully.
# Create a local ECDSA key pair with the default name.
<Sysname> system-view
[Sysname] public-key local create ecdsa
Generating Keys...
Create the key pair successfully.
# Create a local RSA key pair with the name rsa1.
<Sysname> system-view
[Sysname] public-key local create rsa name rsa1
The range of public key modulus is (512 ~ 2048).
161