Syntax
password-control expired-user-login delay delay times times
undo password-control expired-user-login
Default
A user can log in three times within 30 days after the password expires.
Views
System view
Predefined user roles
network-admin
Parameters
delay delay: Sets the maximum number of days during which a user can log in using an expired
password. The value range for the delay argument is 1 to 90.
times times: Sets the maximum number of times a user can log in after the password expires. The value
range for the times argument is 0 to 10. 0 means that a user cannot log in after the password expires.
Usage guidelines
This command is effective only for non-FTP login users. An FTP user cannot continue to log in after its
password expires.
Examples
# Specify that a user can log in five times within 60 days after the password expires.
<Sysname> system-view
[Sysname] password-control expired-user-login delay 60 times 5
Related commands
display password-control
password-control history
Use password-control history to set the maximum number of history password records for each user.
Use undo password-control history to restore the default.
Syntax
password-control history max-record-num
undo password-control history
Default
The maximum number of history password records for each user is 4.
Views
System view
143
To Next Page
Loading...
Need help?
General
