HP 5920 - Ldap-Server

[Sysname] pki entity en
[Sysname-pki-entity-en] fqdn abc@pki.domain.com
ip
Use ip to configure the IP address for a PKI entity.
Syntax
ip { ip-address | interface interface-type interface-number }
s configured for a PKI entity.
ser roles
Paramete
Pv4 address.
face-type interface-number: Specifies the primary IPv4 address of an interface as the IPv4
Usage gu
s of the PKI entity. In the latter case, you do not need to assign an IP address to
e interface when you execute this command, but you must assign an IP address before the device
Examples
I entity en.
<Sysname> system-view
pki entity en
ki-entity-en] ip 192.168.0.2
ldap-server
Use ldap-server to specify an LDAP server for a PKI domain.
Syntax
ldap-server host hostname [ port port-number ] [ vpn-instance vpn-instance-name ]
undo ldap-server
Use undo ip to remove the configuration.
undo ip
Default
No IP address i
Views
PKI entity view
Predefined u
network-admin
rs
ip-address: Configures an I
interface inter
address of the PKI entity.
idelines
Use this command to configure an IP address for a PKI entity or specify the primary IPv4 address of an
interface as the IP addres
th
requests a certificate.
# Configure 192.168.0.2 as the IP address of the PK
[Sysname]
[Sysname-p
Use undo ldap-server to remove the configuration.
192