HP 5920 User Manual

Usage guidelines
• If you do not specify any parameter, the command displays IPv4 source guard entries on all
interfaces on the public network.
• If you specify neither an interface nor an IRF member, the command displays IPv4 source guard
entries of all interfaces on in the IRF fabric.
Examples
# Display IPv4 source guard entries on all interfaces on the public network.
<Sysname> display ip source binding
Total entries found: 5
IP Address MAC Address Interface VLAN Type
10.1.0.5 040a-0000-4000 XGE1/0/1 2 DHCP snooping
10.1.0.6 040a-0000-3000 XGE1/0/1 2 DHCP snooping
10.1.0.7 040a-0000-2000 XGE1/0/1 2 DHCP snooping
10.1.0.8 040a-0000-1000 Vlan3 N/A DHCP relay
10.1.0.9 040a-0000-1000 Vlan3 N/A Static
Table 32 Command output
Field Descri
p
tion
Total entries found Total number of IPv4 source guard entries.
IP Address IPv4 address in the IPv4 source guard entry.
MAC Address
MAC address in the IPv4 source guard entry. N/A means that no MAC
address is bound in the entry.
Interface Interface of the binding entry.
VLAN
VLAN information in the IPv4 source guard entry. N/A means that the
entry contains no VLAN information.
Type
Type of the IPv4 source guard entry:
• Static—Manually configured entry.
• DHCP relay—Entry dynamically created by DHCP relay.
• DHCP server—Entry dynamically created by DHCP server.
• DHCP snooping—Entry dynamically created by DHCP snooping.
Related commands
• ip source binding
• ip verify source
display ipv6 source binding static
Use display ipv6 source binding static to display static IPv6 source guard entries.
Syntax
display ipv6 source binding static [ ip-address ipv6-address ] [ mac-address mac-address ] [ vlan vlan-id ]
[ interface interface-type interface-number ] [ slot slot-number ]
281

HP 5920 Specifications

General

Brand	HP
Model	5920
Category	Switch
Language	English