arp source-suppression enable
Use arp source-suppression enable to enable the ARP source suppression function.
Use undo arp source-suppression enable to restore the default.
Syntax
arp source-suppression enable
undo arp source-suppression enable
Default
ARP source suppression function is disabled.
Views
System view
Predefined user role
network-admin
Usage guidelines
Configure this feature on the gateway devices.
Examples
# Enable the ARP source suppression function.
<Sysname> system-view
[Sysname] arp source-suppression enable
Related commands
display arp source-suppression
arp source-suppression limit
Use arp source-suppression limit to set the maximum number of unresolvable packets that can be
received from a device in 5 seconds.
Use undo arp source-suppression limit to restore the default.
Syntax
arp source-suppression limit limit-value
undo arp source-suppression limit
Default
The maximum number is 10.
Views
System view
Predefined user roles
network-admin
291
To Next Page
Loading...
Need help?
General
