HP 5920

Syntax
display ssl client-policy [ policy-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
policy-name: Specifies an SSL client policy by its name, a case-insensitive string of 1 to 31 characters. If
you do not specify this argument, the command displays information about all SSL client policies.
Examples
# Display information about the SSL client policy policy1.
<Sysname> display ssl client-policy policy1
SSL client policy: policy1
SSL version: SSL 3.0
PKI domain: client-domain
Preferred ciphersuite:
RSA_AES_128_CBC_SHA
Server-verify: enabled
Table 31 Command output
Field Description
Server-verify
Indicates whether the client is enabled to use digital certificates to
authenticate servers.
pki-domain (SSL client policy view)
Use pki-domain to specify a PKI domain for the SSL client policy.
Use undo pki-domain to restore the default.
Syntax
pki-domain domain-name
undo pki-domain
Default
No PKI domain is specified for an SSL client policy.
Views
SSL client policy view
Predefined user roles
network-admin
274