AAA commands
The device supports the FIPS mode that complies with NIST FIPS 140-2 requirements. Support for features,
commands, and parameters might differ in FIPS mode and non-FIPS mode. For more information about
FIPS mode, see Security Configuration Guide.
General AAA commands
access-limit enable
Use access-limit enable to set the maximum number of online users in an ISP domain. After the number
of online users reaches the allowed maximum number, no more users are accepted.
Use undo access-limit enable to restore the default.
Syntax
access-limit enable max-user-number
undo access-limit enable
Default
There is no limit to the number of online users in an ISP domain.
Views
ISP domain view
Predefined user roles
network-admin
Parameters
max-user-number: Maximum number of online users that the ISP domain can accommodate. The value
range is 1 to 4294967294.
Usage guidelines
System resources are limited, and user connections may compete for network resources when there are
excessive users. Setting a proper limit to the number of online users helps provide reliable system
performance.
Examples
# Set a limit of 500 user connections for ISP domain test.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] access-limit enable 500
1
To Next Page
Loading...
Need help?
General
