HP 5920 User Manual

accounting lan-access radius-scheme radius-scheme-name local none command specifies a primary
RADIUS accounting method and two backup accounting methods, local accounting and no accounting.
With this command, the device performs RADIUS accounting by default, performs local accounting
when the RADIUS server is invalid, and does not perform accounting when both of the previous methods
are invalid.
Examples
# Configure ISP domain test to use local accounting for LAN users.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] accounting lan-access local
# Configure ISP domain test to use RADIUS accounting scheme rd for LAN users and use local
accounting as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] accounting lan-access radius-scheme rd local
Related commands
• accounting default
• local-user
• radius scheme
accounting login
Use accounting login to specify the accounting method for login users.
Use undo accounting login to restore the default.
Syntax
In non-FIPS mode:
accounting login { hwtacacs-scheme hwtacacs-scheme-name [ radius-scheme radius-scheme-name ]
[ local ] [ none ] | local [ none ] | none | radius-scheme radius-scheme-name [ hwtacacs-scheme
hwtacacs-scheme-name ] [ local ] [ none ] }
undo accounting login
In FIPS mode:
accounting login { hwtacacs-scheme hwtacacs-scheme-name [ radius-scheme radius-scheme-name ]
[ local ] | local | radius-scheme radius-scheme-name [ hwtacacs-scheme hwtacacs-scheme-name ]
[ local ] }
undo accounting login
Default
The default accounting method of the ISP domain is used for login users.
5

HP 5920 Specifications

General

Brand	HP
Model	5920
Category	Switch
Language	English