HP 5920

Syntax
rmdir remote-path
Views
SFTP client view
Predefined user roles
network-admin
Parameters
remote-path: Specifies the directories to delete from an SFTP server.
Examples
# Delete the sub-directory temp1 under the current directory on the SFTP server.
sftp> rmdir temp1
scp
Use scp to transfer files with an SCP server.
Syntax
In non-FIPS mode:
scp server [ port-number ] [ vpn-instance vpn-instance-name ] { put | get } source-file-name
[ destination-file-name ] [ identity-key { dsa | rsa } | prefer-compress zlib | prefer-ctos-cipher { 3des |
aes128 | aes256 | des } | prefer-ctos-hmac { md5 | md5-96 | sha1 | sha1-96 } | prefer-kex
{ dh-group-exchange | dh-group1 | dh-group14 } | prefer-stoc-cipher { 3des | aes128 | aes256 | des }
| prefer-stoc-hmac { md5 | md5-96 | sha1 | sha1-96 }] * [ publickey keyname | source { interface
interface-type interface-number | ip ip-address } ] *
In FIPS mode:
scp server [ port-number ] [ vpn-instance vpn-instance-name ] { put | get } source-file-name
[ destination-file-name ] [ identity-key { dsa | rsa } | prefer-compress zlib | prefer-ctos-cipher { aes128
| aes256 } | prefer-ctos-hmac { sha1 | sha1-96 } | prefer-kex dh-group14 | prefer-stoc-cipher { aes128
| aes256 } | prefer-stoc-hmac { sha1 | sha1-96 }] * [ publickey keyname | source { interface
interface-type interface-number | ip ip-address } ] *
Views
User view
Predefined user roles
network-admin
Parameters
server: Specifies an IPv4 server by its address or host name, a case-insensitive string of 1 to 20
characters.
port-number: Specifies the port number of the server, in the range of 0 to 65535. The default is 22.
250