HP 5920

308
<Sysname>system-view
[Sysname]ip urpf strict
Related commands
display ip urpf
display ip urpf
Use display ip urpf to display uRPF configuration.
Syntax
display ip urpf [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies an IRF member device. The slot number argument specifies the ID of the IRF
member device.
Examples
# Display uRPF configuration.
<Sysname> display ip urpf
Global uRPF configuration information:
Check type: loose
Allow default route
Table 36 Command output
Field Descri
p
tion
Global uRPF configuration information Global uRPF configuration.
Check type uRPF check mode: loose or strict.
Allow default route Allow use of the default route.