Default
The maximum account idle time is 90 days.
Views
System view
Predefined user roles
network-admin
Parameters
idle-time: Specifies the maximum account idle time in days, in the range of 0 to 365. 0 means no
restriction for account idle time.
Usage guidelines
If a user has not been logged in within the specified idle time since the last successful login, the user
account becomes invalid.
Examples
# Set the maximum account idle time to 30 days.
<Sysname> system-view
[Sysname] password-control login idle-time 30
Related commands
display password-control
password-control login-attempt
Use password-control login-attempt to specify the maximum number of consecutive failed login attempts
and the action to be taken when a user fails to log in after the specified number of attempts.
Use undo password-control login-attempt to restore the default.
Syntax
password-control login-attempt login-times [ exceed { lock | lock-time time | unlock } ]
undo password-control login-attempt
Default
The maximum number of consecutive failed login attempts is 3 and a user failing to log in after the
specified number of attempts must wait for 1 minute before trying again.
Views
System view
Predefined user roles
network-admin
Parameters
login-times: Specifies the maximum number of consecutive failed login attempts, in the range of 2 to 10.
146
To Next Page
Loading...
Need help?
General
