Field Description
Duration (seconds) IKE SA lifetime (in seconds) of the IKE proposal
Related commands
ike proposal
display ike sa
Use display ike sa to display information about the current IKE SAs.
Syntax
display ike sa [ verbose [ connection-id connection-id | remote-address [ ipv6 ] remote-address
[ vpn-instance vpn-name ] ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
verbose: Displays detailed information.
connection-id connection-id: Displays detailed information about IKE SAs by connection ID, in the range
1 to 2000000000.
remote-address: Displays detailed information about IKE SAs with the specified remote address.
ipv6: Specifies an IPv6 address.
remote-address: Remote IP address.
vpn-instance vpn-name: Displays detailed information about IKE SAs in an MPLS L3VPN. The vpn-name
argument is a case-sensitive string of 1 to 31 characters. To display information about IKE SAs on the
public network, do not specify this parameter.
Usage guidelines
If you do not specify any parameter, the command displays summary about all IKE SAs.
Examples
# display information about the current IKE SAs.
<Sysname> display ike sa
Connection-ID Remote Flag DOI
----------------------------------------------------------
1 202.38.0.2 RD IPSEC
Flags:
RD--READY ST--STAYALIVE RL--REPLACED FD—FADING
371
To Next Page
Loading...
Need help?
General
