HP 5920

Syntax
mac-authentication max-user user-number
undo mac-authentication max-user
Default
The maximum number of concurrent MAC authentication users on a port is 256
Views
Ethernet interface view
Predefined user roles
network-admin
Parameters
user-number: Sets the maximum number of concurrent MAC authentication users on the port. The value
range is 1 to 256.
Examples
# Configure port Ten-GigabitEthernet 1/0/1 to support up to 32 concurrent MAC authentication users.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] mac-authentication max-user 32
Related commands
display mac-authentication
mac-authentication timer
Use mac-authentication timer to set the MAC authentication timers.
Use undo mac-authentication timer to restore the defaults.
Syntax
mac-authentication timer { offline-detect offline-detect-value | quiet quiet-value | server-timeout
server-timeout-value }
undo mac-authentication timer { offline-detect | quiet | server-timeout }
Default
The offline detect timer is 300 seconds, the quiet timer is 60 seconds, and the server timeout timer is 100
seconds.
Views
System view
Predefined user roles
network-admin
112