EasyManuals Logo

HP 6100 User Manual

HP 6100
185 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #120 background imageLoading...
Page #120 background image
Table 36 EVA4x00 power specifications — 208 Volts
2C4D2C3D2C2D2C1DSpecification
176713901013638Total System WattageTypical
1
5585430030141729Total System BTU/hour
4.43.52.61.6Input Current (A) -
Typical per line
22017013298In Rush Current (A)
7.55.94.32.7Input Current (A) -
Maximum per line
Failover Mode
1 Typical is described as a system in normal steady state operation. (i.e., both PDUs operating normally, the array
reading/writing to disk drives in a production environment).
This data represents fully populated drive enclosures with 15K RPM disk drives. Other drive types may vary slightly.
For example, if you are using 10K RPM drives, the power specifications will be approximately 20% less than the 15K
RPM drives.
Table 37 EVA4x00 power specifications — 230 Volts
2C4D2C3D2C2D2C1DSpecification
176713901013638Total System
Wattage
Typical
1
5585430030141729Total System
BTU/hour
4.23.32.41.5Input Current (A) -
Typical per line
244190147104In Rush Current (A)
7.15.54.12.6Input Current (A) -
Maximum per line
Failover Mode
1 Typical is described as a system in normal steady state operation. (i.e., both PDUs operating normally, the array
reading/writing to disk drives in a production environment).
This data represents fully populated drive enclosures with 15K RPM disk drives. Other drive types may vary slightly.
For example, if you are using 10K RPM drives, the power specifications will be approximately 20% less than the 15K
RPM drives.
Table 38 EVA6x00 power specifications — 208 Volts
2C8D2C7D2C6D2C5D2C4DSpecification
33442967259022141837Total System
Wattage
Typical
1
1140910124883875536268Total System
BTU/hour
8.47.46.55.54.6Input Current (A) -
Typical per line
363321280250220In Rush Current (A)
14.212.611.09.47.8Input Current (A) -
Maximum per line
Failover Mode
1 Typical is described as a system in normal steady state operation. (i.e., both PDUs operating normally, the array
reading/writing to disk drives in a production environment).
This data represents fully populated drive enclosures with 15K RPM disk drives. Other drive types may vary slightly.
For example, if you are using 10K RPM drives, the power specifications will be approximately 20% less than the 15K
RPM drives.
120 Regulatory notices and specifications

Table of Contents

Other manuals for HP 6100

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP 6100 and is the answer not in the manual?

HP 6100 Specifications

General IconGeneral
BrandHP
Model6100
CategoryStorage
LanguageEnglish

Related product manuals