EasyManua.ls Logo

HP 6125XLG - BIDIR-PIM Configuration Example

HP 6125XLG
383 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
129
Scope: non-scoped
Group/MaskLen: 224.0.0.0/4
RP address Priority HoldTime Uptime Expires
10.110.9.1 192 150 00:03:42 00:01:48
Scope: 239.0.0.0/8
Group/MaskLen: 239.0.0.0/8
RP address Priority HoldTime Uptime Expires
10.110.5.2 (local) 192 150 00:06:54 00:02:41
# Display RP information on Switch F.
[SwitchF] display pim rp-info
BSR RP information:
Scope: non-scoped
Group/MaskLen: 224.0.0.0/4
RP address Priority HoldTime Uptime Expires
10.110.9.1 (local) 192 150 00:00:32 00:01:58
BIDIR-PIM configuration example
Network requirements
As shown in Figure 48:
• VOD streams are sent to receiver hosts in multicast.
• Source 1 and Source 2 send multicast data to the multicast group 225.1.1.1.
• Host A and Host B are receivers of this multicast group.
• IGMPv2 runs between Switch B and Host A and between Switch D and Host B.
Figure 48 Network diagram
Table 9 Interface and IP address assignment
Device Interface IP
address
Switch A VLAN-interface 100 192.168.1.1/24
BIDIR-PIM
Source 1 Source 2
Host A
Receiver 1
Switch A
Vlan-int101
Vlan-int101
Vlan-int102 Vlan-int102
Vlan-int103
Vlan-int103
Vlan-int100
Vlan-int200
Vlan-int3
0
0
Vlan-int400
Switch D
Switch C
Switch B
Host B
Receiver 2
Loop0

Table of Contents

Other manuals for HP 6125XLG

Related product manuals