7138
OUT file cannot be created due to security violation error.
Cause. Attempt to create a file with an unauthorized user ID.
Effect. The file is not created.
Recovery. Create the file using an authorized user ID or assign write permission to the user ID.
7139
The backup files may be opened for write because the
SHAREOPEN option was used for Backup. This may result in
inconsistent file data on the backup tape.
Cause. The SHAREOPEN option was used in the BACKUP command, which gives other processes
read/write access to the backup files during the BACKUP operation. This option presents some
risk to data integrity because files could be modified while being backed up.
Effect. BACKUP or RESTORE continues.
Recovery. Informational message only no corrective action is needed.
7141
Unable to obtain MYPIN and processor information.
Cause. An EXCEED^MYPINERROR has occurred.
Effect. BACKUP or RESTORE continues.
Recovery. Informational message only no corrective action is needed.
7142
CATALOGFILES option was used in the Backup command while
CATALOG OFF was specified in the DEFINE. The files will not
be cataloged in the DSM/TC database.
Cause. A conflict exists between the DEFINE attribute and the command line parameter.
Effect. The files are not cataloged.
Recovery. Informational message only no corrective action is needed.
7143
The collation object already exists on disk and its
definition is equivalent to the one on tape.
Cause. The collation object is identical to the one on the disk.
Effect. None.
Recovery. Informational message only no corrective action is needed.
7144
This tape can only be restored with RESTORE (D30 or later).
7138 203
To Next Page
Loading...
Need help?
General