HP Digital Sender Flow 8500 fn2 - Step one: Access the HP Embedded Web Server (EWS); Step two: Configure the Network Identification settings

Step one: Access the HP Embedded Web Server (EWS)
1.
From the Home screen on the product control panel, select the Information icon, and then select the
Network icon to display the IP address or host name.
2. Open a web browser, and in the address line, type the IP address or host name exactly as it displays on the
product control panel. Press the Enter key on the computer keyboard. The EWS opens.
NOTE: If the web browser displays a message indicating that accessing the website might not be safe,
select the option to continue to the website. Accessing this website will not harm the computer.
Step two: Congure the Network Identication settings
NOTE: Conguring email setup on the Networking tab is an advanced process and might require the assistance
of a system administrator.
1. Using the EWS top navigation tabs, click Networking.
NOTE: For conguring the network settings for use with Oice 365, Step ve: Set up Send to Email to use
Oice 365 Outlook (optional) on page 29
2. On the TCP/IP Settings dialog, click the Network Identication tab.
20 Chapter 2 Use the scanner ENWW