3. From the Home screen on the product control panel and select Scan to USB Drive.
4. Select Choose and select the ash drive. Save the le on the root of the USB ash drive, or save it in an
existing folder.
5. Select the Job Name text eld to open a keyboard, then type the name for the le, and then select Enter
.
6. To congure settings for the document, select Options. For example:
●
Select File Type and Resolution to specify the type of le to create, the resolution, and the output
quality.
●
If the original document is printed on both sides, select Original Sides, and then select 2 Sided.
7. Set options marked with a yellow triangle before using the preview feature.
NOTE: After the preview scan, these options are removed from the main Options list and are summarized
in the Pre-scan Options list. To change any of these options, discard the preview and start over.
Using the preview feature is optional.
8. Select the right pane of the screen to preview the document. In the preview screen, use the options on the
right of the screen to adjust the preview options and to rearrange, rotate, insert, or remove pages.
Use these options to toggle between single-page view and thumbnail view. More options are
available in thumbnail view than in single-page view.
Use these options to zoom in or out on the selected page.
NOTE: Select only one page at a time to use these options.
Use this option to rotate the page 180 degrees.
NOTE: This option is available only in the thumbnail view.
Use this option to delete the selected pages.
NOTE: This option is available only in the thumbnail view.
Use these options to rearrange the pages within the document. Select one or more pages and
move them to the left or right.
NOTE: These options are available only in the thumbnail view.
ENWW Perform a scan task 71
To Next Page
Loading...