To Next Page

To Previous Page

4 Maintaining the monitor

Properly maintained, your monitor can run for many years. These instructions provide steps you can perform

to keep your monitor in the best condition.

Maintenance guidelines

Follow these instructions to enhance the performance and extend the life of the monitor.

● Do not open the monitor cabinet or attempt to service this product yourself. Adjust only those controls

that are covered in the operating instructions. If the monitor is not operating properly or has been

dropped or damaged, contact an authorized HP dealer, reseller, or service provider.

● Use only a power source and connection appropriate for this monitor, as indicated on the label or back

plate of the monitor.

● Be sure that the total ampere rating of the products connected to the outlet does not exceed the current

rating of the AC outlet and that the total ampere rating of the products connected to the cord does not

exceed the rating of the cord. Look on the power label to determine the ampere rating (AMPS or A) for

each device.

● Install the monitor near an outlet that you can easily reach. Disconnect the monitor by grasping the plug

rmly and pulling it from the outlet. Never disconnect the monitor by pulling the cord.

● Turn the monitor o when it is not in use, and use a screen saver program. Doing this can substantially

increase the life expectancy of the monitor.

NOTE: A burned-in image on the monitor is not covered under the HP warranty.

● Never block the slots and openings of the cabinet or push objects into them. These openings provide

ventilation.

● Do not drop the monitor or place it on an unstable surface.

● Do not allow anything to rest on the power cord. Do not walk on the cord.

● Keep the monitor in a well-ventilated area, away from excessive light, heat, or moisture.

Cleaning the monitor

Use these instructions to clean your monitor when necessary.

1. Turn o the monitor and unplug the power cord from the AC outlet.

2. Disconnect any external devices.

3. Dust the monitor by wiping the screen and the cabinet with a soft, clean antistatic cloth.

4. For more diicult cleaning situations, use a 50/50 mix of water and isopropyl alcohol.

IMPORTANT: Do not use cleaners that contain petroleum-based materials such as benzene, thinner, or

any volatile substance to clean the monitor screen or cabinet. These chemicals might damage the

monitor.

26 Chapter 4 Maintaining the monitor

Other manuals for HP E14 G4

Questions and Answers:

Need help?

Do you have a question about the HP E14 G4 and is the answer not in the manual?

General

Color gamut	72 %
Pixel pitch	0.161 x 0.161 mm
Screen shape	Flat
Pixel density	157 ppi
Display diagonal	14 \
Display technology	LED
Native aspect ratio	16:9
Vertical scan range	59 - 60 Hz
Maximum refresh rate	60 Hz
Horizontal scan range	30 - 80 kHz
Contrast ratio (typical)	800:1
Display brightness (typical)	400 cd/m²
Supported graphics resolutions	640 x 480 (VGA), 720 x 400, 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1440 x 900 (WXGA+), 1600 x 900, 1680 x 1050 (WSXGA+), 1920 x 1080 (HD 1080)
Built-in USB hub	Yes
DisplayPorts quantity	0
USB upstream port type	USB Type-C
Power consumption (standby)	0.3 W
Power consumption (typical)	6 W
Operating temperature (T-T)	5 - 35 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	20 - 80 %
Package depth	61 mm
Package width	405 mm
Package height	284 mm
Package weight	1540 g
Tilt angle range	0 - 78 °
Certification	BIS; BSMI; CB; CCC; CE; cTUVus; EAC; ENERGY STAR®; FCC; ICES; ISE for Cambodia; ISO 9241-307; KC/KCC; NOM; SEPA; Taiwan Green Mark; TUV/GS; VCCI; Vietnam MEPS; WEEE; ISC; WW application; UAE
Product color	White
Market positioning	Business