Table 2-11 Service label components (continued)
Component
(4) Serial number
(5) Warranty period
● Regulatory label(s)—Provide(s) regulatory information about the computer.
● Wireless certication label(s)—Provide(s) information about optional wireless devices and the approval
markings for the countries or regions in which the devices have been approved for use.
Inserting a nano SIM card (select products only)
IMPORTANT: Inserting a SIM card of the wrong size could damage the SIM card or cause the SIM card to
become stuck in the slot. The use of SIM card adapters is not recommended. To prevent damage to the SIM
card or the connectors, use minimal force when inserting or removing a SIM card.
NOTE: Before purchasing a SIM card, follow these instructions to determine the correct SIM card size for
your computer:
1. Go to http://www.hp.com/support, and then search for your computer by product name or number.
2. Select Product Information.
3. Refer to the listed options to determine which card to purchase.
To insert a SIM card, follow these steps:
1. Position the computer display-side up on a at surface, and then lift up the kickstand.
2. Insert the removal tool or a small straightened paper clip (1) into the card tray access hole.
3. Press the tool or clip in gently until the card tray is ejected.
4. Remove the tray (2) from the computer and insert the card (3).
Inserting a nano SIM card (select products only) 21
To Next Page
Loading...
Need help?
General
