HP Engage Go 10 - Locating the Mobile System Power Button; Locating the I;O Connectivity Base Power Button

Locating the mobile system power button
The computer power button is located on the top-right edge of the bezel.
Locating the I/O connectivity base power button
The power button is located on the underside of the I/O connectivity base.
The head unit controls the I/O connectivity base. When the head unit is turned o, the I/O connectivity
base is turned o, and power is not available from the I/O connectivity base ports. The exception is the I/O
connectivity base USB port that connects to the head unit. That port remains powered so that it can continue
to communicate with the head unit and allow the I/O connectivity base to turn back on when the head unit is
turned on.
After the system is turned o, you can press the power button on the underside of the I/O connectivity base to
allow power to be available on the I/O connectivity base ports while the head unit remains turned o.
10
Chapter 2 Computer features