EasyManua.ls Logo

HP Engage Go 10 - Specifications; Computer Specifications; Input Power

HP Engage Go 10
45 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Specications6
This chapter provides specications for your computer.
Computer specications
This section provides specications for your computer. When you travel with your computer, the computer
dimensions and weights, as well as input power ratings and operating specications, provide helpful
information.
Table 6-1 Computer specications
Metric U.S.
Temperature
Operating 5°C to 35°C 41°F to 95°F
Nonoperating –20°C to 60°C –4°F to 140°F
Relative humidity (noncondensing)
Operating 10% to 90%
Nonoperating 5% to 95%
Maximum altitude (unpressurized)
Operating –15 m to 3,048 m –50 ft to 10,000 ft
Nonoperating –15 m to 12,192 m –50 ft to 40,000 ft
Input power
The power information in this section may be helpful if you plan to travel internationally with the computer.
The computer operates on DC power, which can be supplied by an AC or a DC power source. The AC power
source must be rated at 100–240 V, 50–60 Hz. Although the computer can be powered from a standalone DC
power source, it should be powered only with an AC adapter or a DC power source supplied and approved by
HP for use with this computer.
The computer can operate on DC power within the following specications. The voltage and current for your
computer is located on the regulatory label.
Table 6-2
Input power
Input power Rating
Operating voltage and current 5 V dc @ 3 A / 9 V dc @ 3 A / 10 V dv @ 5 A / 12 V dc @ 5 A / 15 V dc @
4.33 A / 20 V dc @ 3.2 A – 65 W USB-C
Specications 31

Table of Contents

Other manuals for HP Engage Go 10

Related product manuals